Chiamaci: +39 0444 774334
Follow Us:
  • Italiano
  • Inglês
  • Alemão
  • Russo
  • Espanhol
  • Francês
  • Português

Dry Type Transformers and Reactors Class ≤ 1.1 kV

News

Cerca

Newsletter

Iscriviti alla nostra Newlsetter per rimanere sempre aggiornato sulle ultime novità.

  • Este campo é para efeitos de validação e deve ser mantido inalterado.

Dry Type Transformers and Reactors Class ≤ 1.1 kV

Cold-rolled grain-oriented (CRGO) cores: high efficiency, low consumption

On the occasion of its 20th anniversary, GBE relaunches the range of air-insulated low-voltage transformers and reactors with rectangular and circular cross-section for higher voltages. The proposed product is directed to the low-voltage distribution market with an eye for special applications, specific operating class in the converter field and for any type of installation: marine, offshore and onshore, mining, wind-power and more.

Unlike what has been offered in recent years and, above all, differently from the competitors, GBE S.p.A. proposes an exclusive product with losses on the electromagnetic core of the transformers two to three times lower than what is available on the market. GBE seeks to meet the demands of its customers with greater sensitivity to energy saving and adopts criteria similar to the ECO Directive (EN 50588-1) limited to transformers with at least one coil in class bigger than 1.1 kV.

The cores of the low-voltage transformers are made with low losses cold-rolled grain-oriented (CRGO) magnetic sheet and cut at 45° in “step-lap” mode. The structural carpentry is galvanised with clamping directly on the columns of the core. The coils are made with copper and/or aluminium conductor and insulating material in class F or H. Every product in the entire range is impregnated in vacuum autoclave with class H polyester resin that provides mechanical robustness, incredible silence during operation and, above all, maximum resistance to moisture and pollution. The transformers and reactors can be equipped with profiles for ground anchoring or trucks complete with orthogonally revolving wheels. Should a specific IP be guaranteed, GBE proposes a new series of self-supporting panels protection boxes made of pickled or galvanised sheet metal, depending on the type of installation. Painting is guaranteed with high-strength polyester epoxy paints for installation even in the most aggressive environments.


News

Transformers for measuring of power equipment

  • 11 Dezembro 2020

Transformers for measuring of power equipment Maximum reliability in the testing of inverters for solar application GBE S.p.A., in collaboration with a well-known Italian partner, participated in the design and construction of a highly advanced test room located in Northern Europe and used for the testing of power converters for solar application. The project involves […]

Continua

Transformers and Reactors for marine applications

  • 24 Junho 2020

Offshore and onshore, an exclusive product for all types of marine installations Transformers and reactors for marine applications are distinguished in two different types of installations: offshore and onshore. For each of these installations, additional distinctions can be made depending on the application and use. GBE develops these exclusive products in cast resin, dry type […]

Continua

A look at the past to define the future

  • 28 Maio 2020

  GBE celebrates 20 years of business. We have achieved excellent results thus far, but we’re not done yet. There are numerous projects currently under way – not only in terms of the production process, with new investments especially in the power division – but also in regards to certifications in new markets where specific […]

Continua
© 2014 GBE S.p.A Stabilimento e sede legale: Via Teonghio, 44 - 36040 Orgiano - Vicenza - Italy Capitale Sociale: Euro 1.000.000,00 i.v. P. I.V.A./CF IT02829300249 - REA 278537 - Registro Imprese Vicenza 26501/2000 Privacy policy