El transformador en aceite hermético normalmente presenta una caja impermeable dotada de ondas que permiten la expansión del aceite con la variación de temperatura. La estanqueidad de la caja es de hasta 0,5 Bar. Este tipo de transformador es el más extendido en el mundo. En el transformador hermético el aceite no está en contacto con el aire y por tanto no se comprometen las propiedades eléctricas del mismo, lo que le garantiza una larga duración en el tiempo. Para potencias superiores a 3150 kVA o en el caso de transformador con radiadores, el transformador puede ser en todo caso hermético mediante una batiente de nitrógeno.
Potenza | 50 kVA – 5MVA |
Clase de tensión | 1.1kV – 52kV |
Clases de temperatura de materiales | A , F |
Temperaturas ambiente | -60 a + 60 |
Materiales arrollamiento | aluminio o cobre |
Tipo de aceite | Mineral, de silicona, éster o vegetal |
Accesorios | Válvula de alivio, termómetro, nivel de aceite, amortiguadores de vibración, contenedores de protección |
Puntos fuertes | Instalación en el exterior incluso con condiciones ambientales agresivas; dimensiones compactas para las altas tensiones, excelente estanqueidad ante sobretensiones en resonancia |
Eco 3+ transformers with amorphous core As of 1 July 2021, all transformer manufacturers will have to strictly comply with the production of transformers classified with the term Tier 2, with the exception of specific applications, as laid down in Regulation no. 548/2014 with Phase 2. However, for over 10 years, GBE has been offering […]
ContinuaISO 45001 Certification Workplace health and safety: the personnel are the primary wealth for GBE GBE has integrated its IMS system with ISO 45001 certification to ensure safe and healthy workplaces and prevent work-related injuries and illnesses. For many years, GBE has been in possession of ISO 9001 certification related to product quality and ISO […]
ContinuaQuay transformers: Shore-to-Ship Respect for the port environment, therefore, reduction of consumption, pollution and noise The regulations in port areas increasingly call for a reduction in the air and noise pollution produced by the ships moored in ports. This requirement is met by using ground power instead of on-board generation during mooring. The shore-to-ship […]
Continua